• Sinpro Fiberglass

What are the advantages of wall cloth?

What are the advantages of wall cloth?

Seamless
The height of the wall cloth is 2.7-3.1 meters, so that the whole wall does not have joints, which solves the obvious joint problems caused by the fabric splicing on the above figure in the construction, avoiding the trouble of joint cracking, and there will not be the phenomenon of glue overflow.

Environmental tasteless
Multifunctional seamless wall cloth is made of silk, wool, cotton, hemp and other natural textile fiber cloth as raw material processing of a kind of wall material, using new technology to implement strict production process, strict quality management to environmental protection, must by the national testing center testing, test data proves that the practical accessories must also meet the requirements of the national interior decoration environmental protection material, non-toxic harmless to human body, Occupancy is available on construction day.

Breathable, mildew resistant and corrosion resistant
Seamless wall cloth without changing textile handle, performance on the basis of the increase of the wall cloth antibacterial mouldproof function, antibacterial sterilization rate was 99%, mouldproof level index, bacteriostatic rate 99%, anti-corrosion performance is good, the wall cloth is in use process itself has the function of sterilization, antibacterial, anticorrosion, mould no survival environment, even if be affected with damp be affected with damp, moisture will be through the wall cloth fine cracks, So as to achieve mildew proof effect.

Fire retardant
The multi-functional seamless wall cloth is processed by high-tech nano patent technology and its flame retardant function reaches the European standard. It can automatically block the combustion in a short time when vertical combustion is carried out.

Wall wear
Stick on the wall, as whole metope added a soft steel screen, increase metope fastness, prevent metope craze, achieve metope level off effect.

Easy to do
Seamless wall cloth through a special process of anti-oil, anti-fouling and waterproof treatment, can be wiped with wet towel, so as to keep the wall bright and clean.

Colour and lustre is rich
Wall cloth strictly in accordance with: washable, sun resistant high standards of execution. Stable color, rich color sample, under normal state can ensure that the color of the wall cloth does not fade, not dim.

Good sound insulation effect
As a result of seamless wall cloth surface texture concave and convex, can produce diffuse to sound wave, soak and soft reflection effect, make it spread sound fast, echo is small, its sound-absorbing, muffler, because this has good sound insulation effect.

Maintenance of wall cloth
Appear warping phenomenon, need to rework repair, usually with wall cloth joint repair glue filling, and rolling fixed, if the edge hardening spring, can be wet and soft after filling glue press. Bubbles and empty drums can be separated by wall cloth knives, and air is released, and glue is injected and pressed.

Cleaning of wall cloth
Usually only use a semi-wet clean towel to wipe the dusty part. Towel should be cleaned in time, the part that has besmirch can be cleaned properly with catharsis spirit, the effect is particularly good. Once there is a stain to remove in time, do not delay time. When wiping, pay attention not to touch the joint of bad wall cloth, it is best to do it by yourself, do not give the nanny and hourly workers to do, so as not to wipe hard, causing losses to the wall cloth.
A few stains can be wiped with clean sponge wipes; Dust can be cleaned by a vacuum cleaner with feather duster flapping clean; Ink pen marks can be mixed with ethanol, water, cleaning essence a little cleaning; Oil stains can be cleaned with turpentine or a 50% mixture of tenna water and water.

Maintenance of wall cloth
For the wall cloth maintenance of this aspect of the problem is actually very simple, when the beginning of construction is actually involved in the maintenance of the problem, because the wall cloth can not be ventilated after pasting, the need for natural dry, at this time if the ventilation may cause joint cracking, warping and other problems.
After sticking the wood floor and into the furniture need to pay attention to not let the construction or installation personnel touch rotten, because the late maintenance, even if it is as big as the nail will have a little color difference, and the broken place is more difficult to repair than other problems. Prolong the life is the usual habit, we should pay attention to not graffiti on the top, not with hard objects directly hit the wallpaper, if the wall moisture leakage should be timely treatment of the wall or do a good job of waterproof.


Post time: May-16-2022